RAETTS Air Bearing Blower for Landfill Leachate Wastewater Treatment
RAETTS Air Bearing Blower for landfill leachate wastewater treatment Landfill leachate wastewater treatment plants operate under some of the most demanding conditions in the wastewater industry. High organic loads, elevated ammonia concentrations, corrosive gases, and continuous 24/7 operation place heavy demands on aeration systems. As aeration typically accounts for 50–70% of total energy consumption in […]
50%+ Energy Savings Aeration Achieved by Replacing Roots Blowers with Maglev Technology at a Municipal WWTP
50%+ Energy Savings Aeration Achieved by Replacing Roots Blowers with Maglev Technology at a Municipal WWTP, RAETTS Maglev Blower Retrofit Project in Jiaozuo, Henan As energy prices continue to rise and wastewater treatment plants face increasing pressure to reduce operating costs, aeration system upgrades have become one of the most effective paths toward energy optimization. […]
Why Pulp & Paper Wastewater Plants Are Switching to Maglev Turbo Blowers for Aeration
Why More Pulp & Paper Wastewater Plants Are Specifying Maglev Turbo Blowers for Aeration A Case Study of a 3 × 55kW Maglev Blower Installation in an Industrial WWTP As energy costs rise and environmental regulations tighten, pulp and paper wastewater treatment plants are under increasing pressure to reduce operating costs while maintaining stable biological […]
RAETTS Completes 220kW Maglev Turbo Blower Upgrade at Glazov WWTP — A Major Roots Blower Replacement Delivering 30–40% Energy Savings
RAETTS Completes 220kW Maglev Turbo Blower Upgrade at Glazov WWTP — A Major Roots Blower Replacement Delivering 30–40% Energy Savings Russia’s Glazov Wastewater Plant Transitions From Traditional Roots Blowers to High-Efficiency Maglev Blower Technology RAETTS is proud to announce the successful installation and commissioning of two 220kW Maglev Turbo Blowers at the Glazov Wastewater Treatment […]
Maglev Turbo Blower for Aquaculture | 30% Energy Savings & Higher Oxygenation Efficiency
Maglev Turbo Blower for Aquaculture | 30% Energy Savings & Higher Oxygenation Efficiency Delivering another milestone project built for real-world aquaculture performance. RAETTS recently completed an aeration system renovation for a large shrimp farm, replacing the traditional 132kW Roots blowers with our high-efficiency 95kW maglev turbo blower. The new system now provides stable and energy-saving […]
How does a turbo blower differ from a traditional Roots blower?
How Does a Turbo Blower Differ From a Traditional Roots Blower? (A Complete Comparison for Wastewater Treatment Plants)** In modern wastewater treatment plants, aeration accounts for 40–60% of total power consumption.This is why the choice of blower technology directly affects operating cost, plant stability, and long-term lifecycle performance. As more WWTPs move toward energy-efficient upgrades, […]
22-300KW 17-336m³/min 40-120Kpa Magentic levitation Turbo Blower
22-300KW 17-336m³/min 40-120Kpa Magentic levitation Turbo Blower RAETTS 22-300KW 17-336m³/min 40-120Kpa Maglev Turbo Blower PMSM High Efficiency Industrial Air Blower Centrifugal Blowers for Waste Water Treatment Why Magnetic levitation Technology Is Redefining Industrial Turbo Blower Direct drive PMSM with >97% efficiency No contact, no oil, no friction, almost zero maintenance Smart VFD control, precisely matching […]
Why Modern Wastewater Plants Are Switching to Maglev Blowers — RAETTS Installs 3×95kW Maglev Units for Advanced Aeration
Why More Wastewater Treatment Plants Are Choosing Maglev Blowers: RAETTS Completes Installation of 3×95kW Units As wastewater treatment plants around the world pursue higher efficiency, lower operating costs, and more stable aeration performance, one trend has become increasingly clear: Maglev blowers are rapidly becoming the preferred choice for modern WWTPs. RAETTS recently completed the installation […]
Why More Wastewater Treatment Plants Are Specifying Maglev Blowers as the New Standard for Aeration
Why More Wastewater Treatment Plants Are Specifying Maglev Blowers as the New Standard for Aeration Over the past few years, wastewater treatment plants (WWTPs) around the world have entered a new phase of energy optimization and automation. As discharge standards become stricter and power costs continue to rise, traditional blower technologies—such as Roots blowers, PD […]
