Many people is curious about the working principle of the maglev turbo blower:how we make it runs?At first,we need to know one working principle:when we energize the coil, it can produce a magnetic field. air blower manufacturersAccording to the working principle of magnets: same-poles repels and opposite-poles attracts.The maglev bearing is a magnetic induction coil bearing,we set the same-poles of magnet for the bearing coil and the rotating shaft,when the bearing coil is energized,the force of the magnet will float the shaft.The complete working principle of magnetic levitation blower will be like this:
1.when the maglev air blower is connecting with power,the maglev bearing controller will send out current signal,the current amplifier will amplify the current signal and send it to maglev bearing sensor,when the maglev bearing sensor receive the signal,it will send the current to maglev bearing,then the bearing magnet will generate the magnetic field,then the magnetic force will float the shaft.central air blower
2.The VFD of the air blower is used for controling the motor running speed.When the motor is running,since the motor is connecting with the shaft,and shaft is connecting with impeller,then the shaft and impeller will run.When the impeller is running is high speed,it will generate a vacuum area,and the vacuum area will suck the surrounding air to the impeller,then the impeller will compress the air(at this time,the air will generate dynamic pressure) and discharge it to the outlet pipeline.
3.When the shaft is running in high speed,due to the gravity of the shaft,it will generate vibration and displacement,this will not good for the air blower,since the gap between shaft and maglev bearing is very small,displacement may result in shaft touching with the bearing.So it will require you need a very good software control system in maglev bearing controller.RAETTS maglev bearing controller can guarantee the shaft displacement error within 1um,which is much higher than the peers who can only do it within 10um.
4.In order to protect the maglev blower shaft from damage,we set a protection bearing which is to protect the shaft falling down in full running speed(when there is sudden power failure and the UPS power supply doesn’t work at the same time).
RAETTS is the first one who have the ability to produce the maglev turbo blower and air bearing centrifugal blower.We master the core technology,providing good quality air blower with very reasonable price,helping our customer to save more cost.air blower manufacturers
RAETTS miniature air foil bearing blower is designed for small sewage treatment plant,such as town STP,street WTP.These type of wastewater treatment plant has very small volume wastewater treatment capacity,only 500m3/day-1000m3/day.This type of small air bearing has the advantages such as compact size design,lower noise up to 65dB,easy installation and mainteance,small footprint.Many customers like to use air pressure blower to replace the heavy and loud noise roots blower.central air blower
24 months warranty for the whole air blower manufacturers
air blower manufacturers compact size,small footprint,lower noise no more than 65dB,easy maintenance
air blower manufacturers Product packing information:1pcs/package
payment info:T/T(30% advance payment,70% before shipment)central air blower
Origin information:made in China
RAETTS Konrad type portable air blower,central air blower
RAETTS high speed centrifugal blower have two different type:belt-drive type and direct-drive type.Direct-drive type has higher efficiency than belt-drive type.This type of centrifugal air blower is widely used as the air source of air knife drying system.The applications of this centrifugal blower is including:beer/beverage bottle drying,can drying,jar drying,food drying before packing,PCB board drying,glass drying and so on.The firect-drive type high speed centrifugal blower has higher efficiency,which means it has higher air flow and air pressure,some customers also use it for aquaculture oxygen.air blower manufacturers
Selection parameters table
Air blower-An Ultimate FAQ Guide:
2.About air blower manufacturers production skills training
3.About air blower manufacturers production management system
4.About air blower manufacturers technology
5.About air blower manufacturers customization services
6.What is the operating temperature range of the air blower?
7.What Key Features Should You Look for in an Air Blower?
8.How does an air blower manufacturers work?
9.About the scale of air blower manufacturers factory
10.What are the different types of air blower manufacturers available in the market?
11.What is the operating voltage of the air blower?
12.About air blower manufacturers overseas warehouse
13.What material is used for the outer shell of the air blower?
14.How has air blower technology evolved over time?
15.About air blower manufacturers delivery date
16.What are the key factors to consider when selecting an air blower for industrial use?
17.How to troubleshoot common issues with an air blower?
18.How to choose the right air blower manufacturers for your specific needs?
19.About air blower manufacturers raw materials
20.What are the advantages of using an turbo air blower manufacturers?
21.About air blower manufacturers air blower origin
22.What are the common applications of an air blower manufacturers?
23.About air blower manufacturers production equipment
24.About air blower manufacturers raw material procurement system
25.What is the size of the air blower?
26.What are the maintenance requirements for an air blower manufacturers?
27.About air blower manufacturers payment method
28.How long is the service life of an air blower manufacturers?
29.About air blower manufacturers production capacity
1.About air blower manufacturers MOQ
Normally our MOQ for air blower is 1 set
2.About air blower manufacturers production skills training
RAETTS will train the production staffs for 3 months before they do production,including:machine operation,assembly,testing and so on.
3.About air blower manufacturers production management system
RAETTS use 6S system to manage the production,we also have enviromental management system certificate ISO14001:2015 and occupational health and safety management ISO45001:2018
4.About air blower manufacturers technology
RAETTS air bearing blower technology is originated from South Korea and maglev turbo blower technology is originated from Germany.RAETTS also have R&D team from Xi’an Jiaotong University.
5.About air blower manufacturers customization services
RAETTS has more than 20 peoples R&D team,which can help customer to do customization for the air blowers to meet the different applications
6.What is the operating temperature range of the air blower?
The operating temperature range of an air blower varies depending on the type and size of the blower. Generally, air blowers can operate at temperatures ranging from 40°F (4.4°C) to 250°F (121°C).
Smaller air blowers, such as those found in computers and electronic systems, operate within a much smaller temperature range. These systems typically run between 0°F and 140°F (-17.7°C and 60°C).
Large air blowers, such as those used in industrial or commercial settings, have a much wider operating temperature range. These systems can handle temperatures up to 500°F (260°C). At these temperatures, it is critical to monitor both the air blower and the actual output to ensure the system is not overworking or underperforming.
When designing an air blower system, it is important to select components that are rated for the particular operating temperature ranges. Components made out of materials that can withstand high temperatures, such as nickel-plated brass or stainless steel, are typically best suited for long-term use.
Since air blowers are intended for use in various temperature extremes, it is important to account for any potential changes during operation. Increases in air temperature can lead to decreased performance, while decreases in air temperature can result in decreased output.
Furthermore, all air blowers should be operated within a safe range of temperature to avoid any potential damage to the blower or the surrounding environment. For this reason, regular monitoring of the system should always be conducted to ensure the health and safety of everyone involved.
7.What Key Features Should You Look for in an Air Blower?
1. CFM: Make sure that the air blower you choose has the correct CFM (Cubic Feet per Minute) ratings to meet your needs.
2. Power: If you need to move air quickly and efficiently, look for an air blower with a higher power output.
3. Portability: If you need to take your air blower to different sites, choose one with built-in portability and handles.
4. Safety Features: Ensure the air blower has built-in safety features such as an automatic shut-off in case of overheating.
5. Price: Consider your budget when searching for an air blower as prices can range from a few dollars to several hundred.
8.How does an air blower manufacturers work?
The main structure of the air blower is including motor,shaft,bearing and impeller.When the motor is running,it will drive the shaft to run,then shaft drive bearing to run,then bearing drive the impeller to run.After the impeller runs,it will generate a vacuum area surrounding the impeller and suck the surrounding air inside.Then the air will be compressed by the impeller and discharged outside.
9.About the scale of air blower manufacturers factory
For now,RAETTS has 3 factory:
Ganzhou standard product production base:30000m2;
Dongguan R&D product production base:20000m2;
Germany production base:2000m2;
10.What are the different types of air blower manufacturers available in the market?
For the industrial air blower,normally it is including side channel blower(also called ring blower),roots blower(also called lobe blower),single-stage centrifugal blower,multi-stage centrifugal blower,air foil bearing blowers and maglev turbo blowers.
11.What is the operating voltage of the air blower?
The operating voltage of an air blower typically depends on its size and power output. Most air blowers are designed to run on either 110V or 220V AC power. For example, a larger blower with more power may require a 220V power source while a smaller blower with less power may only need 110V. Additionally, it is important to note that many air blowers have both 110V and 220V models, and the user should choose the right model to match the existing power infrastructure of the given application.
12.About air blower manufacturers overseas warehouse
RAETTS is cooperating with global distributors,some distributors has stock or sample in their warehouse.For now,RAETTS has Germany factory warehouse,and we are building the USA warehouse.
13.What material is used for the outer shell of the air blower?
The outer shell of an air blower is typically made of a variety of materials, depending on its intended use. For example, some air blowers are designed specifically for a particular environment and require a specific shell material to protect it from corrosion and wear.
For instance, a commercial air blower used in the automotive industry might be made from stainless steel or other metals that can withstand extreme temperatures, while a laboratory air blower used for scientific experiments may be made out of aluminum.
For applications where an air blower is expected to operate in outdoor or wet conditions, polyester or heavy duty polyvinyl chloride (PVC) is usually the shell material of choice. These synthetic materials are waterproof, durable, and resistant to corrosion, making them a popular choice for protecting air blowers that are exposed to the elements.
For long life, air blowers made with a plastic shell are often reinforced with aluminum or steel to ensure a rigid, lightweight housing. Plastic also provides insulation against heat and sound, making it a great choice for air blowers that will be used in high-noise areas.
Finally, some air blowers feature housings made from a composite material, which combines plastic and metal together to offer a lightweight, yet rugged construction. This combination makes a composite shell ideal for air blowers that are required to operate in wild environments or under extreme conditions.
Regardless of whether a air blower features a metal, plastic, or composite shell, all of these materials offer protection for the delicate components within, helping to ensure reliable performance in any environment.
14.How has air blower technology evolved over time?
Air blower technology has evolved over time in many ways to make it more efficient, reliable, and cost-effective. Since the beginnings of air blower technology, blowers have become more tenacious and lighter due to the advent of composite materials and improved engineering techniques.
Initially, most air blowers were powered by combustion engines, typically gasoline or diesel. Despite their efficiency, combustion engines pose a number of potential safety hazards and may be expensive to run. Today, the majority of air blowers are powered by electric motors, sometimes referred to as “turbo” motors, which provide more power with greater energy efficiency.
As far as performance is concerned, most air blowers now feature variable-speed control, which allows users to adjust the airflow output to fit the requirements of the job. Variable-speed control not only makes air blowers more efficient but also reduces the amount of time needed for repairs and maintenance. Additionally, many air blowers today are manufactured with eco-friendly designs that help to reduce energy consumption.
To meet the needs of the commercial market, air blowers are now built with advanced features such as digital temperature control and pressure gauges. This allows users to precisely set the desired temperature and pressure for their applications, while other features like low-noise motors make them easier to operate in quiet environments.
Air blower technology continues to improve, and manufacturers are now putting out models capable of speeds up to 15,000 RPM. This high level of performance helps to increase the efficiency of an air blower’s airflow, resulting in a faster work rate and even greater energy savings.
Overall, air blower technology has seen tremendous improvement over the years, from combustion engines to digital temperature control and high-speed motors. These advancements have helped to bring air blowers into the modern age, offering users greater ease of use and energy efficiency.
15.About air blower manufacturers delivery date
For the regular model air blowers(air suspension blower and maglev turbo blower) which RAETTS is producing,the common delivery time will be 30-40 days.For Super air blower and EXPLORER series high speed centrifugal air blower,delivery date is about 10 days.For some other R&D products,RAETTS delivery data is about 3-4 months.
16.What are the key factors to consider when selecting an air blower for industrial use?
The decision to choose an air blower for industrial use can depend on many factors. Here are the key factors that should be considered:
Power: Air blowers come with various power ratings, ranging from 0.2 kW to 25 kW, depending on the application. Choosing the right amount of power will help ensure optimal performance of the blower.
Design: The design of an air blower varies according to the application it is meant for. Depending on the need, choosing the right type of blower will help to ensure efficient and productive use.
Connectivity: Air blowers can be connected in several ways. Selecting the correct air blower with the right type of connection like plug type, air-cooled/water-cooled systems, or through a flexible hose is essential.
Durability: Air blowers come in different materials, some of which are cooler and stronger than others. Choosing the right material to suit the job requirements will ensure that the air blower has a longer service life.
Energy Efficiency: It is important to look for air blowers that have the best energy efficiency ratings. A blower with a high rating will consume less electricity and help reduce operational costs.
17.How to troubleshoot common issues with an air blower?
1. Check the power supply: Make sure the proper voltage is being supplied to the air blower and that any wiring is properly connected and secure.
2. Check the air filters: Check the filters inside the blower for any dirt or debris that may be blocking air flow. If the filters are dirty, clean them with compressed air or a soft brush.
3. Inspect the fan: Check the fan blades for any damage or distortion which could be causing sub-optimal performance and possibly even noise. If the blades are damaged, replace them with new ones.
4. Check the exhaust port: Check the exhaust port for any blockages that could be restricting airflow.
5. Run a diagnostic test: If the air blower isn’t working correctly, try running a diagnostic test to identify any potential errors. Depending on the model of the machine, this may be done with a computer diagnostic tool or a battery or electric screwdriver.
6. Lubricate the air blower: If the blower is not getting any air flow, check the motor to ensure that it is lubricated properly.
7. Inspect the belts: Check the belts that drive the blower to be sure that they are tight and not worn or frayed.
18.How to choose the right air blower manufacturers for your specific needs?
General speaking,we will do model selection of air blower according to customer’s required air flow,air pressure,application,installation altitude,suction media.
19.About air blower manufacturers raw materials
RAETTS air blower impeller in made of aluminum alloy,enclosure material is carbon steel,rotor material is cast iron.If customers need other special materials,we can also customized according to customers requirements.
20.What are the advantages of using an turbo air blower manufacturers?
Comparing with tradition roots blowers,single-stage blowers and multi-stage blowers,turbo blowers effciency is 20%-30% higher,which means using an turbo air blower can help customer to save about 20-30% energy,and then reduce the eletric cost.
21.About air blower manufacturers air blower origin
RAETTS air blower is made in China and made in Germany,we have factory both in China and Germany.
22.What are the common applications of an air blower manufacturers?
The air blower can be applied for wastewater treatment aeration,pneumatic conveying,sandblaster,combustion support,galvanization,air knife drying,aquaculture oxygenation,fish farming,etc.
23.About air blower manufacturers production equipment
RAETTS production equipments are including:Germany imported HERMLE five-axis processing center,AFMING five-axis processing center,Japan Mazak CNC machine tool,sheet metal production and processing center,JIR fine CNC processing center,LEADMA CNC processing center,DOOSAN CNC machine tool,test center,accembly center,motor production center,MAKE laser cutting machine,LFK bending machine,Sweden HEXAGON three coordinate inspection instrument and so on.
24.About air blower manufacturers raw material procurement system
RAETTS uses ERP management system to manage the suppliers and follow the raw materials production state.
25.What is the size of the air blower?
The air blower size and power depend on the application for which it is used for. Generally, midsize air blowers range from 3-4 to 7-8 horsepower (hp) for small workshops. For large workshops and industrial applications, air blowers with a power of 10 to 20 hp are used. The size of the air blower also depends upon the amount of air flow it needs to generate. Low-power air blowers have a capacity of 100 CFM (cubic feet per minute) and high-power air blowers can range from 600 to over 5,000 CFM.
In addition to the horsepower and air flow measurements, the size of the air blower is determined by its structural dimensions. It includes the width, length, depth and height. Though, small and large air blowers have the same horsepower and air flow, the frame sizes vary. Smaller, more compact blowers are typically more maneuverable and are ideal for operations where space is limited. This makes them more desirable for professional mechanics, hobbyists, and woodworkers. Medium-size air blowers have larger frames, providing higher airflow but have limited maneuverability. This makes these blowers more suitable for large workshops and industrial applications.
The size of the air blower also depends upon its efficiency and portability. Smaller air blowers are lightweight and more efficient in terms of energy consumption compared to larger models. This is the reason why mechanical workshops prefer smaller air blowers as they can be easily placed and adjusted in tight spaces. On the other hand, large blowers require large wall outlets and a large area of operation. Their motors also require more power, which is reflected in their greater energy consumption.
26.What are the maintenance requirements for an air blower manufacturers?
Different types of air blowers have different maintenance requirements,for traditional roots blower,end users need to add oil for lubrication,replace the ball bearing and change the air inlet filter periodically.But for turbo blower,the maintenance is quite easy and convenient,end users only need to change the air inlet filters 1-3 months.
27.About air blower manufacturers payment method
RAETTS accept payment by T/T(30% advance payment,70% before shipment)
28.How long is the service life of an air blower manufacturers?
The service life of an air blower can vary greatly depending on how it is used and maintained. Generally speaking, the life expectancy of an air blower can range from 10 to 20 years, but it can be extended significantly with proper maintenance.
One of the most important elements to ensuring the life of an air blower is proper installation. Before installation, it is important to consult with the manufacturer and ensure that the installation environment is adequate and not overly humid or dry. If the air blower is going to be exposed to any sort of corrosive or caustic atmosphere, additional measures such as protective coatings should be taken to reduce the potential for damage.
Regular maintenance is essential when it comes to air blowers. It is recommended that all filters be checked and changed every 6 months, and that any loosened mounting hardware should be re-torqued. Additionally, oil and grease should be applied to any moving parts to help reduce friction and extend its life.
The air blower should also be regularly inspected to ensure that the blades, bearings, and motors are undamaged and working properly. If any part of the air blower is not functioning correctly, it should be serviced immediately to ensure that it continues to operate efficiently and not risk any further damage to the machine.
Finally, it is important to note that the life of an air blower can be drastically reduced if it is misused or overworked. It is important to always use the blower within the limits recommended by the manufacturer to ensure that it has the proper service life. By following these recommendations, an air blower should last for at least 10 to 20 years, depending on the environment and how well it is maintained over time.
29.About air blower manufacturers production capacity
RAETTS production quantity for air bearing blower and maglev turbo blower is about 200pcs/month,for high speed centrifugal blower is about 700pcs/month.