RAETTS Products

Experts for air suspension and magnetic levitation technologies.

leaf air blower

RAETTS high speed centrifugal blower have two different type:belt-drive type and direct-drive type.Direct-drive type has higher efficiency than belt-drive type.This type of centrifugal air blower is widely used as the air source of air knife drying system.The applications of this centrifugal blower is including:beer/beverage bottle drying,can drying,jar drying,food drying before packing,PCB board drying,glass drying and so on.The firect-drive type high speed centrifugal blower has higher efficiency,which means it has higher air flow and air pressure,some customers also use it for aquaculture oxygen.leaf air blower 24 months warranty for the whole leaf air blower leaf air blower good quality,good performance,good price,wide range applications,low noise leaf air blower Product packing information:1pcs/package payment info:T/T(30% advance payment,70% before shipment)cold air blower industrial

Product Details

The maglev tubo blower is a kind of centrifugal blower using magnetic levitation bearings.leaf air blower Its main structure is that the blower impeller is directly installed on the extension end of the motor shaft, and the rotor is suspended on middle of the magnetic bearing, it does not need to connect with the speed increaser and coupling, and directly driven by a high-speed motor.This blower is a kind of single-stage high speed centrifugal blower which speed is controlled by a frequency converter.cold air blower industrial
The air enters into the three-dimensional flow impeller which is directly driven by the high-speed permanent magnet synchronous motor, and generates kinetic energy driven by the high-speed rotating impeller. Part of the kinetic energy is converted into pressure potential energy in the diffuser and the volute flow channel, also the flow direction is changed, and finally passes through the exhaust pipe network,then enters into customers process system.

RAETTS miniature air foil centrifugal blower,cold air blower industrial
RAETTS high speed centrifugal blower have two different type:belt-drive type and direct-drive type.Direct-drive type has higher efficiency than belt-drive type.This type of centrifugal air blower is widely used as the air source of air knife drying system.The applications of this centrifugal blower is including:beer/beverage bottle drying,can drying,jar drying,food drying before packing,PCB board drying,glass drying and so on.The firect-drive type high speed centrifugal blower has higher efficiency,which means it has higher air flow and air pressure,some customers also use it for aquaculture oxygen.leaf air blower
24 months warranty for the whole leaf air blower
leaf air blower good quality,good performance,good price,wide range applications,low noise
leaf air blower Product packing information:1pcs/package
payment info:T/T(30% advance payment,70% before shipment)cold air blower industrial
Origin information:made in China
RAETTS air foil bearing blower is suitable for stable and constantly running working conditions(7days/24hrs running),leaf air blowerthe applications is including sewage treatment plant,wastewater treatment plant,municipal wastewater treatment aeration,cement pneumatic conveying,coal powder pneumatic conveying,textile printing and dyeing wastewater treatment,galvanization industry,combustion support and so on.

Selection parameters table

Air blower-An Ultimate FAQ Guide:

1.What is the size of the air blower?
2.About leaf air blower overseas warehouse
3.About leaf air blower customization services
4.What are the key factors to consider when selecting an air blower for industrial use?
5.How to troubleshoot common issues with an air blower?
6.How to choose the right leaf air blower for your specific needs?
7.About leaf air blower R&D capabilities
8.How to Properly Maintain and Extend the Lifespan of Your Air Blower?
9.Which Industries Rely Heavily on Air Blowers for Operations?
10.About leaf air blower production skills training
11.About leaf air blower inventory
12.What is the operating temperature range of the air blower?
13.About leaf air blower warranty
14.About leaf air blower raw materials
15.About leaf air blower payment method
16.What is the operating voltage of the air blower?
17.What are the common applications of an leaf air blower?
18.About leaf air blower air blower origin
19.About leaf air blower raw material procurement system
20.What are the maintenance requirements for an leaf air blower?
21.About leaf air blower production management system
22.What material is used for the outer shell of the air blower?
23.About the development history of leaf air blower factory
24.What Are the Common Noise Levels Associated with Different leaf air blower Models?
25.How Can an Air Blower Benefit Your Home or Industry?

1.What is the size of the air blower?

The air blower size and power depend on the application for which it is used for. Generally, midsize air blowers range from 3-4 to 7-8 horsepower (hp) for small workshops. For large workshops and industrial applications, air blowers with a power of 10 to 20 hp are used. The size of the air blower also depends upon the amount of air flow it needs to generate. Low-power air blowers have a capacity of 100 CFM (cubic feet per minute) and high-power air blowers can range from 600 to over 5,000 CFM.

In addition to the horsepower and air flow measurements, the size of the air blower is determined by its structural dimensions. It includes the width, length, depth and height. Though, small and large air blowers have the same horsepower and air flow, the frame sizes vary. Smaller, more compact blowers are typically more maneuverable and are ideal for operations where space is limited. This makes them more desirable for professional mechanics, hobbyists, and woodworkers. Medium-size air blowers have larger frames, providing higher airflow but have limited maneuverability. This makes these blowers more suitable for large workshops and industrial applications.

The size of the air blower also depends upon its efficiency and portability. Smaller air blowers are lightweight and more efficient in terms of energy consumption compared to larger models. This is the reason why mechanical workshops prefer smaller air blowers as they can be easily placed and adjusted in tight spaces. On the other hand, large blowers require large wall outlets and a large area of operation. Their motors also require more power, which is reflected in their greater energy consumption.

2.About leaf air blower overseas warehouse

RAETTS is cooperating with global distributors,some distributors has stock or sample in their warehouse.For now,RAETTS has Germany factory warehouse,and we are building the USA warehouse.

3.About leaf air blower customization services

RAETTS has more than 20 peoples R&D team,which can help customer to do customization for the air blowers to meet the different applications

4.What are the key factors to consider when selecting an air blower for industrial use?

The decision to choose an air blower for industrial use can depend on many factors. Here are the key factors that should be considered:

Power: Air blowers come with various power ratings, ranging from 0.2 kW to 25 kW, depending on the application. Choosing the right amount of power will help ensure optimal performance of the blower.

Design: The design of an air blower varies according to the application it is meant for. Depending on the need, choosing the right type of blower will help to ensure efficient and productive use.

Connectivity: Air blowers can be connected in several ways. Selecting the correct air blower with the right type of connection like plug type, air-cooled/water-cooled systems, or through a flexible hose is essential.

Durability: Air blowers come in different materials, some of which are cooler and stronger than others. Choosing the right material to suit the job requirements will ensure that the air blower has a longer service life.

Energy Efficiency: It is important to look for air blowers that have the best energy efficiency ratings. A blower with a high rating will consume less electricity and help reduce operational costs.

5.How to troubleshoot common issues with an air blower?

1. Check the power supply: Make sure the proper voltage is being supplied to the air blower and that any wiring is properly connected and secure.

2. Check the air filters: Check the filters inside the blower for any dirt or debris that may be blocking air flow. If the filters are dirty, clean them with compressed air or a soft brush.

3. Inspect the fan: Check the fan blades for any damage or distortion which could be causing sub-optimal performance and possibly even noise. If the blades are damaged, replace them with new ones.

4. Check the exhaust port: Check the exhaust port for any blockages that could be restricting airflow.

5. Run a diagnostic test: If the air blower isn’t working correctly, try running a diagnostic test to identify any potential errors. Depending on the model of the machine, this may be done with a computer diagnostic tool or a battery or electric screwdriver.

6. Lubricate the air blower: If the blower is not getting any air flow, check the motor to ensure that it is lubricated properly.

7. Inspect the belts: Check the belts that drive the blower to be sure that they are tight and not worn or frayed.

6.How to choose the right leaf air blower for your specific needs?

General speaking,we will do model selection of air blower according to customer’s required air flow,air pressure,application,installation altitude,suction media.

7.About leaf air blower R&D capabilities

RAETTS R&D team has more than 20 people,the chief team leader worked for BYD before,and the technique of whole team is supported by Xi’an Jiaotong University.

8.How to Properly Maintain and Extend the Lifespan of Your Air Blower?

Your air blower is an important machine that helps regulate the air you take in and the quality of air your environment receives. Properly keeping it functioning properly will not only help extend its lifespan significantly but also the useful life of other equipment around it. To help properly maintain your air blower and increase its longevity, follow these tips:

1. Clean the Intake.
Regularly check the intake filter and clean it using a damp cloth or vacuum cleaner. This will help ensure that dust and particles don’t build up and clog the engine.

2. Check for Foreign Objects.
Periodically check for any foreign objects inside and around the air blower. This can help you avoid any mishaps and keep your machine running smoothly.

3. Inspect the Interior.
It is important to occasionally disassemble the air blower and inspect the interior for any broken or worn-out parts. This will help you detect any potential problems and allow you to repair them before they can affect the machine’s performance.

4. Regularly Maintain and Service.
Regularly service and maintain your air blower by making sure all lubricants and fluids are replenished and parts are replaced if needed. This will ensure that all parts are functioning as they should, helping keep the machine working at its peak performance.

By following these steps, you can help ensure your air blower runs properly and prevent any potential problems that may lead to it needing replacement or repairs sooner than it should. With regular maintenance and care, your air blower can be in tip-top condition and have a longer lifespan.

9.Which Industries Rely Heavily on Air Blowers for Operations?

1. Manufacturing
2. Mining
3. Agriculture
4. Automotive
5. Food Processing
6. Plastics
7. Construction
8. Ventilation
9. Foundries
10. Powder Technology

10.About leaf air blower production skills training

RAETTS will train the production staffs for 3 months before they do production,including:machine operation,assembly,testing and so on.

11.About leaf air blower inventory

For air bearing blower and maglev turbo blower,RAETTS doesn’t make stock,only produce air blower according to customers order(since different application site may need different designs).For high speed centrifugal blower,RAETTS makes stock.

12.What is the operating temperature range of the air blower?

The operating temperature range of an air blower varies depending on the type and size of the blower. Generally, air blowers can operate at temperatures ranging from 40°F (4.4°C) to 250°F (121°C).

Smaller air blowers, such as those found in computers and electronic systems, operate within a much smaller temperature range. These systems typically run between 0°F and 140°F (-17.7°C and 60°C).

Large air blowers, such as those used in industrial or commercial settings, have a much wider operating temperature range. These systems can handle temperatures up to 500°F (260°C). At these temperatures, it is critical to monitor both the air blower and the actual output to ensure the system is not overworking or underperforming.

When designing an air blower system, it is important to select components that are rated for the particular operating temperature ranges. Components made out of materials that can withstand high temperatures, such as nickel-plated brass or stainless steel, are typically best suited for long-term use.

Since air blowers are intended for use in various temperature extremes, it is important to account for any potential changes during operation. Increases in air temperature can lead to decreased performance, while decreases in air temperature can result in decreased output.

Furthermore, all air blowers should be operated within a safe range of temperature to avoid any potential damage to the blower or the surrounding environment. For this reason, regular monitoring of the system should always be conducted to ensure the health and safety of everyone involved.

13.About leaf air blower warranty

RAETTS warranty time for air bearing blower and maglev turbo blower is 24months,for high speed centrifugal blower is 12 months.

14.About leaf air blower raw materials

RAETTS air blower impeller in made of aluminum alloy,enclosure material is carbon steel,rotor material is cast iron.If customers need other special materials,we can also customized according to customers requirements.

15.About leaf air blower payment method

RAETTS accept payment by T/T(30% advance payment,70% before shipment)

16.What is the operating voltage of the air blower?

The operating voltage of an air blower typically depends on its size and power output. Most air blowers are designed to run on either 110V or 220V AC power. For example, a larger blower with more power may require a 220V power source while a smaller blower with less power may only need 110V. Additionally, it is important to note that many air blowers have both 110V and 220V models, and the user should choose the right model to match the existing power infrastructure of the given application.

17.What are the common applications of an leaf air blower?

The air blower can be applied for wastewater treatment aeration,pneumatic conveying,sandblaster,combustion support,galvanization,air knife drying,aquaculture oxygenation,fish farming,etc.

18.About leaf air blower air blower origin

RAETTS air blower is made in China and made in Germany,we have factory both in China and Germany.

19.About leaf air blower raw material procurement system

RAETTS uses ERP management system to manage the suppliers and follow the raw materials production state.

20.What are the maintenance requirements for an leaf air blower?

Different types of air blowers have different maintenance requirements,for traditional roots blower,end users need to add oil for lubrication,replace the ball bearing and change the air inlet filter periodically.But for turbo blower,the maintenance is quite easy and convenient,end users only need to change the air inlet filters 1-3 months.

21.About leaf air blower production management system

RAETTS use 6S system to manage the production,we also have enviromental management system certificate ISO14001:2015 and occupational health and safety management ISO45001:2018

22.What material is used for the outer shell of the air blower?

The outer shell of an air blower is typically made of a variety of materials, depending on its intended use. For example, some air blowers are designed specifically for a particular environment and require a specific shell material to protect it from corrosion and wear.

For instance, a commercial air blower used in the automotive industry might be made from stainless steel or other metals that can withstand extreme temperatures, while a laboratory air blower used for scientific experiments may be made out of aluminum.

For applications where an air blower is expected to operate in outdoor or wet conditions, polyester or heavy duty polyvinyl chloride (PVC) is usually the shell material of choice. These synthetic materials are waterproof, durable, and resistant to corrosion, making them a popular choice for protecting air blowers that are exposed to the elements.

For long life, air blowers made with a plastic shell are often reinforced with aluminum or steel to ensure a rigid, lightweight housing. Plastic also provides insulation against heat and sound, making it a great choice for air blowers that will be used in high-noise areas.

Finally, some air blowers feature housings made from a composite material, which combines plastic and metal together to offer a lightweight, yet rugged construction. This combination makes a composite shell ideal for air blowers that are required to operate in wild environments or under extreme conditions.

Regardless of whether a air blower features a metal, plastic, or composite shell, all of these materials offer protection for the delicate components within, helping to ensure reliable performance in any environment.

23.About the development history of leaf air blower factory

RAETTS was set up in the year of 2011,the first product is super series high speed centrifugal blower(belt-drive type).The second product is developed in 2014,it is the direct-drive type high speed centrifugal blower,higher efficiency than belt-drive type.Both of this two blowers are used as the air source of the air knife drying systems.The air bearing blower was developed in 2018 and maglev turbo blower was developed in 2019.In 2020,we developed turbo compressor,which is to meet different applications which need higher pressure.

24.What Are the Common Noise Levels Associated with Different leaf air blower Models?

The noise levels associated with different air blower models depend largely on the size and operating speed of the blower. Smaller blowers tend to be quieter than larger ones. Generally, blowers with higher operating speeds will produce more noise than those running at lower speeds.

Centrifugal blowers tend to be the loudest of the three main types of air blowers. An air blower model with a 2-5 horsepower rating typically produces between 60 and 85 dB(A). Larger models with 5-10 horsepower ratings can usually produce between 75 and 100 dB(A).

Axial flow blowers are typically quieter, with an air blower model with a 2-5 horsepower rating usually producing between 50 and 75 dB(A). Models with 5-10 horsepower ratings usually produce between 65 and 90 dB(A).

Regenerative blowers are the quietest of the three main types of air blowers. An air blower model with a 2-5 horsepower rating usually produces between 45 and 70 dB(A). Models with 5-10 horsepower ratings usually produce between 55 and 85 dB(A).

It is important to note that noise levels associated with air blower models can vary significantly based on the design of the blower, the efficiency of the motor, and the environment in which it is operating. For instance, more efficient motors tend to generate less noise, and the noise levels generated by a blower can increase when it is operated in an environment with poor ventilation.

25.How Can an Air Blower Benefit Your Home or Industry?

An air blower is a mechanical device used to generate a flow of air or gas at high pressure. It works by using a motor to drive an impeller or fan, which creates a stream of air that can be directed towards a specific area. Air blowers can have a wide variety of applications, and they can greatly benefit both homes and industries in many ways. Here are some of the main benefits of using an air blower:

1. Ventilation and Cooling:

One of the primary benefits of an air blower is its ability to provide ventilation and cooling. In homes, air blowers can be used to circulate air and improve the overall air quality, which can be especially beneficial for those with respiratory issues or allergies. In industries, air blowers are often used to cool down machinery, preventing overheating and minimizing downtime.

2. Drying and Dehumidifying:

Air blowers can also be used to dry out damp or humid areas in both homes and industries. In homes, they can be used to dry out wet carpets, floors, and furniture after cleaning or flooding. In industries, they can help to reduce the humidity levels, which can not only improve the working conditions for employees but also prevent damage to equipment and products.

3. Dust and Debris Removal:

Air blowers can be used to blow away dust and debris on surfaces, making them useful for both homes and industries. They can be used to clean off surfaces such as floors, furniture, and machinery, making them especially useful in factories and workshops where dust and debris can accumulate quickly.

4. Aeration:

In industries such as wastewater treatment, air blowers are used to provide aeration, which is the process of introducing air into a liquid to increase oxygen levels. This promotes the growth of helpful microorganisms that help to break down organic matter and purify the water.

5. Pneumatic Conveying:

Air blowers are often used in industries for pneumatic conveying, which is the process of moving materials such as powders, granules, and pellets through pipelines using air or gas. This is a cost-effective and efficient way to transport materials, and it is commonly used in industries such as food processing, chemical processing, and pharmaceuticals.

6. Process Cooling:

In industries such as manufacturing and food processing, air blowers are used to provide process cooling, which involves blowing air onto a product or a specific area to cool it down. This is essential for maintaining the quality of products and preventing damage caused by high temperatures.

In conclusion, an air blower can greatly benefit both homes and industries by providing ventilation, cooling, drying, dehumidifying, dust removal, aeration, and process cooling. They are versatile and can be used in various applications, making them an essential tool for many different industries. If you are considering investing in an air blower, be sure to research the different types and models available to find the best one for your specific needs.

 

Tag:cold air blower industrial

 

Solutions&Applications

RAETTS provides high efficiency and energy-saving system solutions for our global customers,contributing to achieve the goal of carbon peaking and carbon neutrality.

For more information,feel free to click here to submit your request,our professional team will contact you soon

Asia HQ

RAETTS High-Tech Park No.3,Juyuan Second Road.Dongguan City,Guangdong Province, China

Europe HQ

NeumarktstraBe 17,32052, Herford, Germany(R&D,Production&Sales)

Belarus

BelPragma LLC

Address: Republic of Belarus, Minsk, st. Amuratorskaya, 4, office 214

Thailand

ENCOTEC Co.,Ltd. Add: 71/296 Soi.Ramkhamhaeng 164,Ramkhamhaeng Rd.,Minburi,Bangkok 10510,Thailand

Malaysia

T&T Pacific Sdn Bhd Add:No.31, Jalan PJU 3/49,Sunway Damansara,47810 Petaling Jaya,Selangor Darul Ehsan

Raetts America Cooperation

Add:21 Center Drive, Hillsdale, NJ 07642

Spain

ASAP Servicios Técnicos Add:Calle Zinc 1, Nave A,28770 Colmenar Viejo, Madrid (Spain)

RAETTS FRANCE

Adresse : 80 Rue Isabelle Eberhardt, 34000 Montpellier.
Telephone: 0033(0)652678173

CONTACT US

For more information,feel free to click here to submit your request,our professional team will contact you soon